Circular Saw Blade CARBIDE for WOOD with NAILS
12 inch 60 Tooth 
Arbor Size=1" shimmed to 5/8"
Tungston Carbide Tipped
Suitable for use with a table saw, chopsaw, miter saw and for some specialized beam cutting circular saws/skilsaws

This blade has a 1" arbor and comes with arbor shims to adapt 
to a 5/8” arbor.  ATB (alternate top bevel) 
For cutting wood with embedded nails, for demolition work or dismantling pallets. 

SPECIFICATIONS

DESCRIPTION: 12"*60T*25.4*2.0 with washer15.88
BODY: 1.8mm 50 steel with hardness of 42, surface flatness is within 5 wires.
TOOTH: 6.0*2.0*3.5mm
TOOTH WELDING: Copper with a brazing temperature of 450 centigrade.
TIP: tip size OKE 60*20*35mm, body thickness 2.0mm
CARBIDE SPECS: YG6
Main components are tungsten and cobalt (International number is YG6) 
Formula is 6% cobalt, 94% tungsten.  
The tooth hardness is 91.  
Design is a compromise to make it harder to break the tooth while staying 
sharp for cutting pallet wood.

INSTRUCTIONS FOR MOUNTING BLADE:

Put 3 to 4 arbor shims on a 5/8” arbor.  
Install the blade near the threads and push it back so that all the arbor shims are 
against the backing.  Then lift the blade slightly and slide it over and onto the arbor 
shims.  Make sure it does not fall between the arbor shims.  
Install the nut and tighten making sure blade is secure.

CLICK HERE for other Saw Blades

WARNING! To prevent serious injury ALWAYS wear eye, face & body protection.

Click here for Safety Products